Electrified Monorail System Drives For Light Loads

drives_for_electrified_monorail_systems_hw_series_800x450

Are electrified monorail systems also an essential means of transport in your production lines? Finding the optimum drive at SEW-EURODRIVE isn’t hard. This is because our drives are of course oriented to your transported goods and your application. In this way, our EMS drives ensure optimum performance, conveyor speed and lift capacity – all according to your needs.
The electrified monorail drives of the HW series are designed for applications in light load range. They comply with the specifications of the C1 Directive (VDI RI-3643) and are very quiet.
The particularly compact HW10 in right-angle design for light loads is the latest, extremely compact size for light loads and delivers a maximum torque of 20 Nm and a permissible wheel load of up to 2500 N.
A maximum torque of 70 Nm and a permissible wheel load of up to 5600 N can be achieved with size HW30.

Features

  • Two sizes mean optimal matching of the conveying capacity, conveyor speed and lift capacity to the selection
  • Comply with the specifications of the C1 Directive (VDI RL-3643)
  • Reliable disengageable coupling
  • Low-maintenance drives
  • Smooth running for operation without vibration
  • Low-noise, also suitable for manual work stations
  • Compact design for space-saving installation
  • Impressive energy saving potential of motors in efficiency class IE2, IE3 or IE4
  • Reliable disk brakes for reproducible stopping accuracy
  • Only high-quality winding wires and insulating materials are used to ensure the inverter’s fault-free operation
  • Electrified monorail drives can be combined with many options from the range of modular systems offered by SEW-EURODRIVE

Technical Data

HW series – light load range

Size HW10 HW30
Maximum output torque
Nm
20 70
Permitted wheel load
N
2 500 5 600
Gear ratio
i
6.75 – 16.5 8.2 – 75
Shaft d x l
mm
14 x 28 20 x 35
25 x 35

Areas of Application

  • Optimised for use in electrified monorail system for light loads and in compliance with VDI Directive 3643 (C1 standard)
  • Floor conveyors
  • Switch setting drives