MOVIFIT® Basic

Basic motor starters, MOVIFIT® basic
Minimum effort – maximum benefit: With the decentralised MOVIFIT® basic motor starter. It is ideally suited as a reversing starter or as a dual-motor starter. For your intralogistics applications.
For efficient materials handling technology: MOVIFIT®basic, the decentralised basic motor starter, available as a reversing starter or as dual-motor starter.
Less is more: Sew Eurodrive has reduced the MOVIFIT® basic to include only the functions and features necessary, and its design means that it is the ideal motor starter for the lower function range. It covers the 4 kW or 2 x 2.2 kW power range.
The motor starter is available as a reversing starter or as a dual-motor starter. The reversing starter enables motor operation in two directions of rotation. Alternatively, you can operate the dual-motor starter with two motors that convey the material flow in one direction independently of one another. In this extremely efficient concept, 2 motors share one MOVIFIT® basic motor starter.
The energy for AC 3 x 400 V is distributed via the FieldPower® terminal from Weidmüller, which is integrated in the unit. Two sensors can be connected to the unit in addition to the drive function when using AS-Interface. These are signaled to the system controller via AS-Interface master without additional costs and the signals can then be processed in the system controller.

Features

  • FieldPower® contact block* for energy distribution with modern and reliable connector technology
  • Simple connection and wiring technology
  • Consistent integration of power distribution components in the housing of the drive unit
  • Consistent use of standard plug connectors for control and motor connection
  • Extremely short assembly and installation times
  • When using AS-Interface, two sensors can, in addition to the drive function, be connected to the unit for direct communication with the system controller (at no additional costs)

Technical Data

Function Reversing Duo Reversing Duo
Control AS-Interface Binary control signals
Type designation MBS4RA-K1-A1 MBS4DA-K1-A1 MBS4RA-B1-A1 MBS4DA-B1-A1
Ma.x motor power kW 4 2 x 2.2 4 2 x 2.2
Connection voltage VAC AC 3 x 380 -10% … 480 + 10%
Line frequency Hz 50 / 60
Line connection / cable cross section FieldPower® contact block*
Line protection External
Nominal output current A 10 2x 5 10 2x 5
Motor connection according to ISO 23570-3 1x Q8/0 2x Q8/0 1x Q8/0 2x Q8/0
Ambient temperature –10 °C to +40 °C
Degree of protection IP54
Service interface RS485 to RJ11 (6P4C) for connecting the MB-LC operator terminal
Connection control M12 plug connector
1x male / 2x female
M12 plug connector
2x male / 1x female
Inputs and outputs 2 digital inputs for connecting external sensors 3 control inputs
1 digital output
DC 24 V output
Brake control Supply via motor connection
Brake voltage = line voltage
BG rectifier in motor terminal box
Dimensions LxWxH mm 255 x 150 x 159

Areas of Application

  • Horizontal materials handling technology
  • Intralogistics
    • Package or pallet conveyors
  • Beverage Industry
    • Conveying bottles or crates